Shark Matrix Plus Robot Vacuum and Mop (UR2650WS) Review: A Budget Combo With a Self-Empty Base
Our verdict: 4.1 / 5
The Matrix Plus packs a lot into a budget price: LiDAR mapping, Matrix Clean grid passes, CleanEdge air jets for corners, a sonic mop and a bagless HEPA base that empties for about 30 days. The base doesn’t wash the mop, and there’s no mop lift listed, so rugs need planning. For small to mid-size homes that want vacuuming plus a light scrub, it’s strong value.
Check price on AmazonHomeHygia is reader-supported. When you buy through links on this page, we may earn a small commission from Amazon at no extra cost to you.
Budget robot combos usually cut corners in obvious places. You get a mop, but no self-emptying. Or self-emptying, but random bump-and-go navigation. Shark’s Matrix Plus, model UR2650WS, is unusual because it keeps the expensive-sounding parts: 360° LiDAR mapping, a self-empty base with a HEPA filter, and sonic mopping.
What it skips is the washing dock. You’ll still rinse the mop pad by hand. This review explains what the Matrix Plus does well, how its sonic mop compares with a basic pad, and who should spend more for a base that washes the mop. We based it on Shark’s published specs and the design, not our own home testing, and we label Shark’s numbers.
Two Shark terms come up a lot below. Matrix Clean means the robot drives a crisscross grid instead of one pass. CleanEdge is Shark’s air-jet edge cleaning, which blows debris out of corners into the robot’s path.
Specs
| Model | UR2650WS |
| Cleaning | Vacuums and sonic mops hard floors at the same time |
| Pattern | Matrix Clean grid, 30% better carpet cleaning vs single pass (maker claim) |
| Edges | CleanEdge Detect air jets with corner recognition, 50% better edges (maker claim) |
| Navigation | 360° LiDAR mapping |
| Brushroll | Self-cleaning |
| Base | Bagless self-empty, up to 30 days |
| Filtration | True HEPA in base, anti-allergen seal |
| Battery | Recharge and resume |
What we like
LiDAR and a self-empty base at this price
Those two features usually push a robot into the mid-range. LiDAR means accurate maps, neat paths, room-by-room cleaning and no-go zones. The self-empty base means you aren’t emptying a tiny bin every day. Getting both in a budget combo is the main reason to choose the Matrix Plus.
A sonic mop with a little more bite
The sonic pad vibrates as it moves, which gives it more scrubbing action than a pad that just drags. It still won’t lift a week-old dried spill, but it handles footprints, light splashes and the daily film on a kitchen floor better than a static pad.
Grid cleaning for carpets
Matrix Clean runs the robot in a crisscross grid, so carpet gets hit from two directions. Shark says that gives 30% better carpet cleaning than a single pass in its sand test. It’s slower, so save it for the busiest rooms.
Air jets for corners
CleanEdge Detect recognizes corners and uses blasts of air to push debris out where the brush can reach it. Shark claims 50% better edge cleaning with it on. Corners and baseboards are exactly where budget robots usually leave a line of dust.
Bagless with HEPA
No bags to buy, and a true HEPA filter in the base with an anti-allergen seal. Our guide on replacing robot vacuum filters explains when to swap it.
What a typical week looks like
Set a daily vacuum-and-mop run for the kitchen and hallways, and a vacuum-only run for bedrooms with rugs. Every few days, rinse the mop pad. About once a month, empty the base bin and tap out the filter. That’s the whole routine, which is light for a robot that also mops.
What could be better
- The base doesn’t wash the mop. Rinse the pad by hand after mopping runs.
- No mop lift listed. Remove the pad on rug days or set no-go zones.
- 30-day base. Smaller than 60-day Shark bases.
- No camera. It won’t recognize socks or cords.
Who should buy it
- Budget buyers who want LiDAR, self-emptying and mopping
- Small to mid-size homes with mostly hard floors
- Pet homes that want a self-cleaning brushroll
- People who don’t want to buy dock bags
Who should skip it
- Homes with lots of rugs, unless you’re fine removing the pad
- Anyone who wants a base that washes the mop
- Allergy-prone owners who prefer sealed bags
Shark Matrix Plus vs Shark AI Ultra AV2501S
| Matrix Plus UR2650WS | AI Ultra AV2501S | |
|---|---|---|
| Mopping | Sonic mop | No |
| Pattern | Matrix Clean | Matrix Clean |
| Edge cleaning | CleanEdge air jets | Side brush |
| Base | 30-day bagless HEPA | 30-day bagless HEPA |
| Navigation | 360° LiDAR | 360° LiDAR |
| Check price | Matrix Plus UR2650WS | AI Ultra AV2501S |
The Matrix Plus adds mopping and air-jet edges to the AI Ultra’s proven formula, often at a lower price. Unless you specifically want a vacuum-only robot, it’s the better buy.
Tips to get the most out of it
- Run mopping only on hard-floor rooms, using room selection in the app.
- Rinse the sonic pad and let it dry fully after each mop run.
- Use Matrix Clean in entryways and living rooms.
- Empty the base bin into a lined trash can.
- If it starts missing areas, check the sensors. See why robots miss spots.
FAQ
Does the Shark Matrix Plus vacuum and mop at the same time?
Yes. It vacuums carpets and floors and sonic mops hard floors in the same run.
Does the Shark Matrix Plus wash its own mop?
No. Its base empties debris but doesn’t wash the mop pad. Rinse it by hand.
How long does the Shark Matrix Plus base hold debris?
Shark says the bagless base holds up to 30 days of dirt and debris.
Does the Shark Matrix Plus have LiDAR?
Yes. It uses 360° LiDAR mapping.
Final word
The Shark Matrix Plus is one of the better budget combos because it doesn’t skip the features that make robots pleasant to live with: real mapping and self-emptying. The sonic mop is a nice upgrade over a basic pad. If you want the mop washed for you, plan on spending more. Otherwise, it’s an easy pick for small and mid-size homes.




