Bissell CrossWave Reach Review: Bissell’s Lay-Flat Wet Dry Vac for Under Furniture

Bissell CrossWave Reach

Our verdict: 4.3 / 5

The CrossWave Reach brings Bissell into the lay-flat wet dry vac game. It lays completely flat to clean under beds and sofas, cleans to the edge with ZeroGap Technology, applies targeted pressure for a faster clean and runs up to 40 minutes. It doesn’t include the hot-air drying dock of the Reach Plus, so you’ll need to let the brush air dry, but it’s a strong cordless pick from a brand with good parts and formula support.

Check price on Amazon

HomeHygia is reader-supported. When you buy through links on this page, we may earn a small commission from Amazon at no extra cost to you.

For years, Bissell’s CrossWave line was the default wet dry vac in many American homes. But newer brands pushed ahead with lay-flat designs that slide under beds and sofas. The CrossWave Reach is Bissell’s answer: a cordless wet dry vacuum and mop that lays completely flat and cleans all the way to the edge.

It comes in two versions. The Reach (4506L) reviewed here, and the Reach Plus (4506F), which adds a hot-air drying dock. Below we look at what the standard Reach does well, where it falls short, and whether the Plus is worth the step up. All specs and claims come from Bissell’s Amazon listing; Bissell’s numbered claims are based on its own testing. We haven’t tested it ourselves.

Specs

Model4506L
TypeCordless wet dry vacuum and mop
Lay-flatLays completely flat, up to 5X farther under furniture (Bissell)
EdgesZeroGap Technology
RuntimeUp to 40 min
CleaningTargeted pressure on hard floors
DryingFloors dry in half the time (Bissell)
FormulaHard Floor Sanitize formula
Hot-air dockNo (see Reach Plus)

What we like

Lays completely flat

The Reach’s headline feature is in the name. It lays completely flat, and Bissell says that lets it clean up to 5X farther under beds, sofas and other low-clearance furniture. Those are the spots where dust, hair and dried spills sit for months with an upright machine. For a CrossWave, this is a big change.

Cleans to the edge

ZeroGap Technology lets the Reach clean all the way to the edge of walls and along baseboards. Bissell has used this on the CrossWave Edge, and it’s well suited to kitchens, hallways and bathrooms, where most dirt ends up in the last inch by the wall.

Faster cleaning and drying

Bissell says the Reach applies targeted pressure to hard floors for a better, faster clean, and dries floors in half the time. It also claims it removes up to 2X more dirt and debris than a manual mop. Faster drying is a practical benefit: you can walk on the floor sooner, and less water sits on wood and laminate.

Up to 40 minutes cordless

Bissell lists up to 40 minutes of runtime, which is enough for most homes in one charge. Being cordless, it’s easy to move from room to room without hunting for outlets.

Sanitize formula option

Bissell offers a Hard Floor Sanitize formula for the Reach. Bissell says it cleans and sanitizes, eliminating 99.9% of bacteria, based on its own testing. Read the label for contact time and directions, because sanitizing claims usually depend on using the product exactly as described.

The bigger advantage of a mainstream brand like Bissell is support. Formulas, brush rolls and filters are easy to find in stores and online, which keeps the machine running for years.

How it handles common jobs

Under beds and sofas

This is the Reach’s biggest advantage over older CrossWave models. Lay it flat and work under low furniture.

Kitchen and bathroom edges

ZeroGap cleaning handles crumbs along cabinets and grime along bathroom walls.

Daily wet and dry messes

It vacuums and mops at the same time, so spills and crumbs come up together. For tile, see our guide to the best mop solution for tile floors.

Bissell CrossWave Reach view 2
Bissell CrossWave Reach view 3
Bissell CrossWave Reach view 4

What could be better

  • No hot-air drying. Only the Reach Plus has the hot-air drying dock. Without it, let the brush roll air dry fully.
  • Claims are Bissell’s own. The 2X, 5X and half-time drying figures come from Bissell’s testing.
  • Suction not listed. Bissell doesn’t give a suction figure.
  • Warranty not listed. Check Bissell’s documentation for warranty terms.

Who should buy it

  • Bissell fans who want a lay-flat model
  • Homes with lots of low furniture
  • People who want strong edge cleaning

Who should skip it

  • Buyers who want a hot-air drying dock (get the Reach Plus)
  • Homes that are mostly carpet
  • People who need a listed suction figure to compare

Bissell CrossWave Reach vs Bissell CrossWave Reach Plus

The same lay-flat CrossWave with one key difference.

CrossWave ReachCrossWave Reach Plus
Model4506L4506F
Lay-flatYes, up to 5X fartherYes, up to 5X farther
EdgesZeroGapZeroGap
RuntimeUp to 40 minUp to 40 min
Hot-air drying dockNoYes
Sanitize formulaHard Floor SanitizeVacuums, mops and sanitizes
Check priceCrossWave ReachCrossWave Reach Plus

The cleaning is the same. Choose the Reach Plus if you want the brush roll dried automatically to help prevent odors. Choose the Reach if you’re happy to let it air dry.

How we scored it

We scored it on the things that matter for this kind of product, using the published specs and design, not lab tests.

AreaScoreWhy
Reach under furniture4.5 / 5Lays completely flat.
Edge cleaning5 / 5ZeroGap Technology.
Runtime4 / 5Up to 40 min.
Self-drying3 / 5No hot-air dock; see Reach Plus.
Brand support4.5 / 5Easy to find Bissell formulas and parts.

Tips to get the most out of it

  1. Use Bissell’s Hard Floor Sanitize formula as directed on the label.
  2. Empty the dirty water tank after each use.
  3. Take out the brush roll and let it air dry fully, since there’s no hot-air dock.
  4. Use the lay-flat position for under-furniture cleaning only, then return upright.
  5. For more on wet cleaning wood, see our guide on whether you can steam mop engineered hardwood.

FAQ

Does the Bissell CrossWave Reach lie flat?

Yes. It lays completely flat, and Bissell says it cleans up to 5X farther under beds, sofas and low furniture.

How long does the Bissell CrossWave Reach run?

Bissell lists up to 40 minutes of runtime.

What is the difference between the CrossWave Reach and Reach Plus?

The Reach Plus adds a hot-air drying dock that dries the brush roll to help prevent odors. Cleaning features are otherwise the same.

Does the Bissell CrossWave Reach sanitize floors?

Bissell says its Hard Floor Sanitize formula cleans and sanitizes and eliminates 99.9% of bacteria, based on its own testing. Follow the formula label for use.

Final word

The Bissell CrossWave Reach finally gives Bissell fans a lay-flat wet dry vac. It reaches under furniture, cleans to the edge and runs up to 40 minutes. If you want hands-off drying, spend more on the Reach Plus; otherwise, the Reach is a strong choice. Without a dryer, don’t store a wet roller; the EPA advises drying damp materials within 24–48 hours to prevent mold.

See the Bissell CrossWave Reach on Amazon