ECOVACS WINBOT W3 Omni Review: A Window Robot That Washes Its Own Pads

WINBOT W3 Omni

Our verdict: 4.4 / 5

The WINBOT W3 Omni is ECOVACS’s most hands-off window robot. Its station washes the wiping pads with 16 high-pressure nozzles in about a minute, the TruEdge scrubber lowers to reach edges and corners, and WIN-SLAM 5.0 plans the route with Fast, Intensive and Zone modes. It is aimed at people with lots of large glass who hate dealing with dirty pads. If you only have a few windows, the simpler WINBOT W2S Pro covers the basics for less.

Check price on Amazon

HomeHygia is reader-supported. When you buy through links on this page, we may earn a small commission from Amazon at no extra cost to you.

Window robots solve a real problem. Big panes, floor-to-ceiling glass and the outside of windows you can reach only by leaning out are tedious and sometimes risky to clean by hand. A robot clings to the glass with suction, sprays and wipes in a planned path, and stops when it is done.

The weak spot has always been the pads. After one or two large windows, a microfiber pad is grey and needs washing, and swapping pads mid-job is fiddly. The WINBOT W3 Omni, released in 2026, tackles that with a multi-functional station that cleans the pads for you.

We looked at what ECOVACS lists for the W3 Omni, how its features fit real homes and where its limits are. We haven’t tested this robot ourselves, and performance figures are the maker’s own claims.

Specs

ModelWINBOT W3 OMNI
ReleasedMarch 2026
StationMulti-functional, auto pad washing
Pad washVortex Wash, 16 high-pressure nozzles, about 1 min
Edge cleaningTruEdge scrubber, 200 RPM
NavigationWIN-SLAM 5.0, 1 mm obstacle precision
SprayTriple-nozzle wide-angle
ModesFast, Intensive, Zone
Safety12-level protection

What we like

The station takes care of dirty pads

This is the headline feature. When a cleaning run ends, the W3 Omni’s station washes the wiping pads using what ECOVACS calls Vortex Wash, with 16 high-pressure nozzles working for about a minute. You don’t have to peel off a grimy pad, rinse it in the sink and wait for it to dry before the next window. ECOVACS also lists an optional self-cleaning function to keep the station itself hygienic.

For homes with a wall of glass, a conservatory or many large panes, that removes the most annoying part of using a window robot.

TruEdge reaches frames and corners

Robots traditionally leave a dirty strip along the frame, because a round or square body can’t get all the way into the corner. The W3 Omni has a scrubber that actively lowers along edges and spins at 200 RPM, then retracts automatically to avoid spreading dirt across clean glass. ECOVACS says it removes dirt in a single pass.

That should mean less finishing work with a cloth after the robot is done.

Smarter navigation

WIN-SLAM 5.0 is ECOVACS’s newest path planning, with dynamic obstacle avoidance listed at 1 mm precision. In practice, that matters for windows with handles, stickers, sensors or mullions. Fast mode handles routine dust, Intensive mode suits grime and water spots, and Zone mode lets you focus on a smudged section instead of cleaning a whole pane again.

Triple spray for even wetting

Three nozzles deliver a wide-angle spray with increased water pressure, according to ECOVACS, and the wet pad follows. Even wetting is what prevents streaks: a dry patch next to a wet one is where marks usually appear. Use plain water or a mild, low-residue solution; cleaners with the EPA Safer Choice label are a sensible choice if you add anything.

WINBOT W3 Omni view 2
WINBOT W3 Omni view 3
WINBOT W3 Omni view 4

What could be better

  • It is a premium machine. The station adds bulk and cost. If you clean a handful of windows a few times a year, a robot without a station, or a good squeegee, makes more sense.
  • You still need to move it. Like any window robot, you place it on each pane, and on the outside of the glass it must be tethered. It doesn’t move between windows on its own.
  • Station needs space and water. Plan a spot near the windows you clean most, and keep the station topped up and emptied as the manual says.
  • Newer model, fewer long-term reports. The W3 Omni launched in 2026, so there is less long-term ownership feedback than for older WINBOT models.

Who should buy it

  • Homes with many large windows, sliding doors or floor-to-ceiling glass
  • People who used a window robot before and hated washing pads
  • Anyone who wants edge cleaning and the newest WIN-SLAM navigation

Who should skip it

  • Small apartments with only a few small windows. A squeegee is quicker and cheaper.
  • Very small panes or divided-light windows, where any robot spends more time turning than cleaning.
  • Buyers who don’t want a station on the floor. The WINBOT W2S Pro is more compact.

WINBOT W3 Omni vs WINBOT W2S Pro

Both robots share the triple-spray design and ECOVACS’s edge cleaning approach. The real difference is the station.

WINBOT W3 OmniWINBOT W2S Pro
Pad cleaningAutomatic station, Vortex WashManual pad washing
Edge cleaningTruEdge scrubber, 200 RPMTruEdge 2.0, four edge brushes
NavigationWIN-SLAM 5.0WIN-SLAM 4.0
SprayTriple nozzle, wide angleTriple spray
SuctionNot stated in listing10,000Pa
ModesFast, Intensive, ZoneFast, Thorough, Edge, Heavy-Duty, Deep, Zone
Safety12-level protection10-stage safety system
Check priceWINBOT W3 OmniWINBOT W2S Pro

Our take: lots of big glass and no patience for dirty pads, get the W3 Omni. A few windows and a tighter budget, the W2S Pro does the core job well.

Tips to get the most out of it

  1. Dust the frame and sill first, so the robot doesn’t spread grit and cobwebs onto wet glass.
  2. Always attach the safety tether, especially on the outside of a window or on high glass.
  3. Start with Fast mode for routine cleaning and save Intensive mode for water spots and pollen buildup.
  4. Wipe the robot’s sensors and edges with a dry cloth now and then so it detects frames accurately.
  5. Avoid cleaning in strong direct sun, which dries the glass too quickly and can leave streaks.

FAQ

Does the WINBOT W3 Omni wash its own pads?

Yes. Its station uses Vortex Wash with 16 high-pressure nozzles to clean the wiping pads in about one minute after use, according to ECOVACS.

Can the WINBOT W3 Omni clean the outside of windows?

Yes, window robots like this can clean either side of the glass. Always attach the safety tether and follow the manual when cleaning outside or at height.

Does the W3 Omni clean window edges and corners?

ECOVACS says its TruEdge scrubber lowers along edges and cleans into corners at 200 RPM, then retracts to avoid cross-contamination.

Is the W3 Omni worth it over the W2S Pro?

It is worth it if you clean many large windows often and want automatic pad washing. For occasional cleaning of a few windows, the W2S Pro is the better value.

Final word

The WINBOT W3 Omni is the most convenient window robot ECOVACS sells, mainly because its station handles the dirty pads. Combined with TruEdge corner cleaning and WIN-SLAM 5.0, it suits homes with lots of large glass. If you only have a few windows, save money with the W2S Pro or a quality squeegee. For a dust-free finish around the windows, see our guides on how to vacuum blinds and how to reduce dust in your house.

See the WINBOT W3 Omni on Amazon