The End of the “Dirty Water” Mop
There is nothing more frustrating than mopping your floor with water that looks like mud five minutes into the job. For decades, the standard mop bucket forced us to push dirty water back onto our freshly scrubbed floors. The O-Cedar mop bucket Rinse Clean System attempts to solve this hygiene problem with a simple yet innovative change: two buckets in one. This system uses a patented dual-chamber design to separate your clean water supply from the dirty wringing water, promising a truly clean finish every time.
This site uses affiliate links. If you purchase a product through a link on this page, we may earn a commission at no extra cost to you. For more details, please visit our affiliate disclaimer page.
The O-Cedar RinseClean Spin Mop & Bucket System utilizes a patented dual-chamber bucket to separate clean and dirty water, ensuring you always mop with fresh solution instead of spreading grime.
As we explore the best options for home hygiene, we have tested numerous systems. You can read more about the evolution of mopping technology in our comprehensive guide to cedar mop and bucket essential cleaning genius. In this review, we will dissect the RinseClean system to see if it lives up to the hype or if it is just another gimmick.
Which RinseClean Bundle Should You Buy?
The O-Cedar RinseClean system comes in several configurations. While the core cleaning mechanism is the same, the value changes depending on the accessories included. Below is a comparison of the top bundles currently available on Amazon to help you maximize your investment.
| Bundle Configuration | Price (Approx.) | Key Inclusions | Best For |
|---|---|---|---|
| Rinseclean Spin Mop & Bucket | $49.96 | Bucket, 1 Mop Head, Handle | First-time buyers wanting the core system. |
| RinseClean + Lavender PACS | $63.46 | Bucket, 1 Mop Head, Handle, Lavender PACS | Users who want a ready-made scented solution. |
| RinseClean + 2 Refills + Citrus PACS | $94.50 | Bucket, 3 Mop Heads (Total), Handle, Citrus PACS | Homes with high traffic or pets needing extra heads. |
Quick Verdict / Overview
The O-Cedar RinseClean is a highly effective tool for maintaining hard floors, particularly if hygiene is your top priority. It successfully removes the “dirty water” issue, but it does require a slight adjustment in cleaning workflow due to the smaller clean water reservoir.
| Feature | Details |
|---|---|
| Rating | 4.5 / 5 |
| Best Use Case | Hardwood, Tile, Laminate, and Vinyl floors. |
| Water Capacity | 1.6 Gallons (Clean Tank) + 3.5 Gallons (Dirty Basin) |
| Handle Length | Telescopic up to 51 inches |
| Pros | Separates clean/dirty water; Hands-free spinning; Removes 99% of bacteria*; Safe for hardwood. |
| Cons | Clean tank refills often; Plastic base can scratch floors if not careful; Top-heavy when full. |
IMAGE: [Action shot of the O-Cedar RinseClean bucket being pushed across a kitchen floor]
How the RinseClean Dual-Chamber Technology Works
The core innovation of this system is the dual-chamber bucket. It solves the problem of cross-contamination by physically isolating your fresh cleaning solution from the dirty water you spin out. This system uses two separate tanks: a top reservoir for fresh water and a bottom basin for collecting dirty water.
To use it, you fill the top reservoir with clean water and your preferred cleaner. When you need to rinse your mop, you pull the red lever on the bucket. This releases a controlled amount of clean water into the “washing” area. You dip your mop to rinse it, then move it to the spinner basket. When you press the pedal to spin, the dirty water is flung out into the separate dirty basin below, never mixing with your clean supply.
This mechanism addresses a common concern found in forums like Reddit, where users ask, “Doesn’t the dirty mop just make the clean water dirty?” By releasing the water in small batches only when you pull the lever, you are constantly introducing fresh water to the mop rather than soaking it in a tub of slowly grimy liquid.
Design & Build Quality
The build quality of the O-Cedar RinseClean is generally robust, though it has some quirks that users must navigate. The bucket is constructed from durable plastic, but the design places the heavy clean water tank high up. This makes the bucket top-heavy when full, requiring two hands to carry it safely to avoid spilling.
The Bucket and Pedal
The foot pedal is large and easy to use, allowing for hands-free wringing. The spinner basket is made of red plastic and is sturdy enough for daily use. However, the spinner design can cause splashing if you spin the mop too vigorously. Users have noted that water can fly over the rim if the pedal is pressed too hard, so a controlled motion is necessary.
The Handle and Mop Head
The handle is made of metal with a plastic telescopic mechanism. It adjusts up to 51 inches, which is excellent for taller users to prevent back strain. However, the connection points can slip if not tightened firmly. The mop head is triangular and made of microfiber. This shape is excellent for reaching corners, but the head is smaller than some traditional mops. The microfiber is soft and absorbent, but the plastic base of the mop head can scratch floors if the microfiber pad wears thin or if you push too hard on the corners.
Key Features & Performance
In our testing of the O-Cedar RinseClean, the standout feature is undoubtedly the ability to control the moisture level precisely. Unlike traditional string mops that leave puddles, the spin mechanism allows you to leave the floor damp or dry, depending on how hard you pump the pedal. This control is critical when cleaning different surfaces, from porous tile to sealed hardwood.
For the best results, we recommend using the O-Cedar PACS. These enzyme-based cleaners dissolve quickly in the 1.6-gallon reservoir. We tested the Lavender PACS on a kitchen floor with dried food stains. The enzymes broke down the grime effectively, and the microfiber head lifted it without needing excessive scrubbing. The triangular head easily navigated tight corners around the cabinets where a standard square mop would have missed spots.
If you need a faster option for daily dusting rather than deep wet mopping, you might consider comparing this to a spray system like the cedar microfiber spray mop genius essential clean. However, for deep cleaning, the RinseClean’s ability to spin out dirty water is superior.
The Hardwood Floor Safety Protocol
Is the O-Cedar RinseClean safe for hardwood floors? The answer is yes, provided you use it correctly. The risk with hardwood is not the water itself, but standing water that seeps into seams and causes warping. Because this mop allows you to spin the head almost completely dry, it is actually safer than a standard mop that leaves the floor sopping wet.
Step-by-Step Hardwood Cleaning
- Prep the Floor: Vacuum or sweep thoroughly to remove abrasive grit that can scratch the wood.
- Minimize Solution: Use warm water only, or a very diluted hardwood-safe cleaner. Avoid soaking the mop.
- Spin Dry: Pump the pedal 5-6 times to ensure the mop is only slightly damp, not wet.
- Mop with the Grain: Wipe the floor gently following the direction of the wood planks.
- Buff Dry: If you notice any lingering damp spots in high-traffic areas, dry them immediately with a microfiber towel.
Common Pain Points & Troubleshooting
While the O-Cedar RinseClean is highly rated, some users report frustrations that can often be resolved with a few adjustments. Based on our analysis of customer feedback, here are the solutions to the most common complaints.
1. “The clean water tank is too small”
Many users on Amazon note that the 1.6-gallon clean reservoir requires refilling during large mopping sessions. While true, this is a necessary trade-off for the dual-chamber design. If the tank were larger, the bucket would be too heavy to lift safely. Workaround: Treat the small tank as a feature—it forces you to use fresh water more frequently, which improves hygiene. Keep a pitcher of warm water nearby to refill quickly without moving the bucket.
2. “The plastic scratches my floor”
This usually happens if the microfiber strands are compressed or if the plastic frame strikes the floor at an angle. Workaround: Ensure the mop head is fully saturated before mopping to cushion the plastic. Always mop with the flat side of the triangle down, not the corners. If your mop head is old and thin, replace it immediately using a high-quality refill like those found at cedar easy wring mop replacement.
3. “The handle keeps collapsing”
The telescopic handle relies on a friction lock. If it is not tightened firmly enough, the motion of mopping can cause it to slide shorter. Workaround: Twist the handle segments clockwise as hard as you can before you start. Check the tightness halfway through your mopping session.
IMAGE: [User adjusting the telescopic handle on the O-Cedar mop to tighten it]
Maintenance and Care
To ensure your O-Cedar RinseClean system lasts for years, proper maintenance of both the mop head and the bucket is essential. Microfiber is durable but requires specific care to maintain its absorbency.
Cleaning the Mop Head
How often should you replace O-cedar rinse clean mop heads? With regular use, replace them every 3 to 6 months. You can extend their life by machine washing them. Use warm water and a mild detergent. Critical: Do not use fabric softener or bleach. Fabric softener coats the fibers and ruins their ability to absorb water and trap bacteria. Always air dry the mop head—never put it in the dryer.
Cleaning the Bucket
How to clean the ocedar rinse clean bucket? It is important to take the bucket apart periodically to prevent mold buildup in the internal channels. The blue top tank can be removed by unlatching the side clips or lifting it off (depending on your specific model version). Rinse the entire unit with warm water. If there is build-up in the drainage holes, use a small brush or a toothpick to clear them. Always store the bucket with the lid open to allow it to dry completely.
O-Cedar RinseClean vs. The Competition
How does the RinseClean stack up against the original O-Cedar EasyWring Spin Mop? The original EasyWring is a fantastic mop, but it uses a single bucket. You wash your mop in the water you just spun out, which eventually turns gray and murky. The RinseClean solves this, but it sacrifices some capacity and adds complexity (and weight) to the bucket.
If you have a small apartment and don’t mind changing your water halfway through, the RinseClean is the superior choice for hygiene. If you have a massive warehouse or commercial space where speed matters more than perfect water clarity, the original single-bucket EasyWring might be more practical because it holds more water and is lighter to maneuver.
Final Verdict: Should You Buy the O-Cedar RinseClean?
The O-Cedar RinseClean Spin Mop & Bucket System successfully addresses the biggest complaint about mopping: using dirty water to clean. While it has minor design flaws like a small clean water reservoir and a top-heavy feel, the performance benefits outweigh these inconveniences for most homeowners.
It removes over 99% of bacteria with just water, making it a cost-effective choice compared to buying endless disposable pads. It is safe for hardwood, laminate, and tile when used correctly. If you are tired of pushing around a muddy bucket of water, the RinseClean is a worthy upgrade.
Who is this for? Pet owners, parents, and anyone with hardwood floors who values a truly hygienic clean.
Ready to upgrade your cleaning routine? Check the latest prices and grab your O-Cedar RinseClean bundle on Amazon today.
Frequently Asked Questions (FAQ)
How much water does the O-cedar rinse clean bucket hold?
The clean water reservoir (the top tank) holds approximately 1.6 gallons of water. The dirty water basin (the bottom bucket) has a larger capacity to hold the wastewater, typically around 3 to 3.5 gallons.
Can I put Dawn dish soap in my mop bucket?
Yes, you can use a small amount of Dawn dish soap in the clean water tank. However, be aware that dish soap can be slippery and may leave a film on your floors if too much is used. It is better to use a dedicated floor cleaner or the O-Cedar PACS designed for the system.
Can you take the blue top off the O cedar mop bucket?
Yes, the blue top tank is removable. This is designed to make emptying the dirty water and cleaning the bucket easier. Most models have a simple latch or lift mechanism to separate the top reservoir from the dirty basin.
Is the O-cedar rinse clean machine washable?
The microfiber mop head is machine washable. Remove it from the plastic base plate and wash it in warm water with mild detergent. Do not use bleach or fabric softeners. The bucket itself should be washed by hand with soap and water.
Why are my floors still dirty even after mopping?
This is often caused by not vacuuming or sweeping first. Mopping with dust or hair on the floor just turns the dirt into muddy streaks. Always dry clean the floor first. Additionally, if your mop water gets too dark, you are spreading dirt. The RinseClean system helps mitigate this, but you still need to replace the clean water if it becomes visibly soiled.
Can I put my cedar mop head in the washing machine?
Yes, the microfiber mop heads are designed to be machine washed. Place them in a laundry bag to protect them from snagging, and use a gentle cycle. Air dry them to preserve the fibers.
Conclusion
The O-Cedar RinseClean Spin Mop & Bucket System offers a practical solution to the age-old problem of cross-contamination. By separating clean and dirty water, it ensures that the final pass over your floors leaves them actually clean, not just wetter. While it requires a bit more effort to refill the smaller clean tank, the trade-off is a level of hygiene that single-bucket systems simply cannot match. If you are looking for a durable, ergonomic, and scientifically smarter way to mop, the RinseClean is a top contender.
For more essential cleaning guides and product reviews, visit our home hygiene hub.
