Bissell CrossWave Reach Plus Review: Lay-Flat Wet Dry Vac With a Hot-Air Dock

Bissell CrossWave Reach Plus

Our verdict: 4.3 / 5

The CrossWave Reach Plus (4506F) is Bissell’s 2026 lay-flat wet dry vac, and the Plus adds the one thing the standard Reach lacks: a hot-air drying dock for the brush roll. It vacuums and mops at once, lies flat under furniture, cleans to the wall with ZeroGap, and lists up to 40 minutes of runtime. Bissell keeps the spec sheet short, so suction and tank sizes aren’t listed, but for odor-free, low-effort mopping it’s a strong pick.

Check price on Amazon

HomeHygia is reader-supported. When you buy through links on this page, we may earn a small commission from Amazon at no extra cost to you.

Bissell has made CrossWave wet dry vacs for years, and most of them shared one weak point: a brush roll that stays damp after cleaning. Leave it in the dock overnight and it can start to smell. The CrossWave Reach Plus, released in September 2026, fixes that with a dock that blows hot air through the roll after each use.

It also brings the “Reach” design: a body that lays completely flat so the head slides under beds and sofas. In this review we go through what the 4506F does, where it falls short, and whether it’s worth stepping up from the standard CrossWave Reach (4506L). Specs come from Bissell’s Amazon listing. We haven’t tested it ourselves, and we label Bissell’s performance claims as claims.

Specs

ModelCrossWave Reach Plus 4506F
TypeCordless wet dry vacuum mop
CleaningVacuums and mops at once
ReachLays completely flat
EdgesZeroGap Technology
RuntimeUp to 40 min (maker claim)
DockHot-air drying for brush roll
Weight8.8 lb
Size10.7 × 8.6 × 43.6 in
ReleasedSeptember 2026
Suction / tanksNot listed

What we like

Hot-air drying dock

This is the reason to buy the Plus. After cleaning, the dock removes excess water and dries the brush roll with hot air, which Bissell says helps prevent odors. A wet roll is the main cause of musty smells in wet dry vacs, and a drying dock means you can park the machine and walk away instead of pulling the roll out to air-dry.

Lays completely flat

The body lays fully flat, and Bissell says it cleans up to 5X farther under beds, sofas and other low furniture than its earlier models. That figure is a maker comparison, but the design point is real: an upright wet dry vac usually stops at the sofa’s edge, which is where dust and pet hair build up.

ZeroGap edges

ZeroGap Technology is designed to clean right up to walls and along baseboards. Edges are where mop water and grime collect, so a head that reaches them cuts down on the need for a separate cloth.

Faster drying floors

Bissell says the head applies targeted pressure to hard floors for a better, faster clean, and that floors dry in half the time compared with its earlier models. Faster-drying floors mean fewer footprints and less slip risk right after mopping.

Vacuum and mop in one pass

Like every CrossWave, the Reach Plus picks up dry debris and washes the floor at the same time. For daily kitchen messes, that means crumbs, juice and muddy paw prints come up in one go instead of sweeping first and mopping second. Up to 40 minutes of runtime is enough for most homes in one session.

The overall package is aimed at reducing effort before, during and after cleaning: no sweeping first, less crouching under furniture, and no roller to dry by hand.

How it handles common jobs

Under beds and sofas

Lay it flat to reach under low furniture without moving it.

Kitchens with daily spills

Wet and dry messes come up together. For more options, see our best kitchen floor mops.

Vinyl and sealed floors

It’s built for hard floors. If you have LVP, read can you mop vinyl plank flooring first.

Bissell CrossWave Reach Plus view 2
Bissell CrossWave Reach Plus view 3
Bissell CrossWave Reach Plus view 4

What could be better

  • Thin spec sheet. Bissell doesn’t list suction, tank sizes or battery capacity on Amazon.
  • Maker comparisons. “5X farther” and “half the time” are Bissell’s claims against its own earlier models.
  • Hard floors only. It isn’t designed for carpet.
  • 8.8 pounds. Not heavy for the class, but not featherweight either.

Who should buy it

  • People bothered by smelly rollers
  • Homes with low beds and sofas
  • Anyone who wants edge-to-edge cleaning

Who should skip it

  • Buyers who want detailed suction specs
  • Mostly carpeted homes
  • Shoppers fine with air-drying the roll by hand

CrossWave Reach Plus vs CrossWave Reach

Both share the same body, size and weight. The difference is in the box and the dock.

Reach Plus 4506FReach 4506L
Lay-flat reachYesYes
ZeroGap edgesYesYes
RuntimeUp to 40 minUp to 40 min
Hot-air drying dockYesNot listed
Sanitize formula claimNot listed99.9% of bacteria
Weight8.8 lb8.8 lb
Check priceReach Plus 4506FReach 4506L

The standard Reach lists Bissell’s Hard Floor Sanitize formula, which Bissell says eliminates 99.9% of bacteria, and claims up to 2X more dirt pickup than a manual mop. If you can live with drying the roll yourself, it does the same cleaning job. If you want the machine to dry itself, the Plus is worth the step up.

How we scored it

We scored it on the things that matter for this kind of product, using the published specs and design, not lab tests.

AreaScoreWhy
Odor control4.5 / 5Hot-air dock dries the roll.
Reach4.5 / 5Lays fully flat.
Edges4.5 / 5ZeroGap design.
Runtime4 / 5Up to 40 min.
Spec clarity3 / 5Suction and tanks not listed.

Tips to get the most out of it

  1. Let the dock finish its drying cycle before you remove the roll.
  2. Empty the dirty water tank after every use.
  3. Use Bissell formulas; homemade mixes can foam or leave residue.
  4. Do a quick dry vacuum on very sandy floors before wet cleaning.
  5. In small homes, a compact machine may suit you better; see our best apartment vacuums.

FAQ

What is the difference between the CrossWave Reach Plus and Reach?

The Reach Plus (4506F) adds a hot-air drying dock that dries the brush roll after use. Body, reach and runtime are the same.

How long does the Bissell CrossWave Reach Plus run?

Bissell lists up to 40 minutes of runtime.

Can the CrossWave Reach Plus clean under furniture?

Yes. It lays completely flat to reach under beds, sofas and other low furniture.

How much does the CrossWave Reach Plus weigh?

The listing gives a weight of 8.8 pounds.

Final word

The Bissell CrossWave Reach Plus is a sensible upgrade for people who like the CrossWave idea but hate a damp, smelly brush roll. Lay-flat reach and ZeroGap edges cover the spots most mops miss, and the hot-air dock handles the cleanup. We’d like Bissell to publish suction and tank figures, but the feature set is solid. Drying matters for hygiene too: the EPA advises drying damp materials within 24–48 hours to stop mold growth.

See the Bissell CrossWave Reach Plus on Amazon